clean air workstation

Clean air workstation with vertical laminar flow system

The clean air workstations from mkf support work under clean room conditions in the laboratory as well as in production, assembly and quality control. Depending on the ambient conditions, the air purity class ISO 5 and better according to DIN ISO 14644 - 1 can be achieved in the work area. The air is filtered by a Filter Fan Unit (FFU) with H14 HEPA filter. The generated laminar air flow directs the particles away from the product to the outside (front side with closed table surface) or downwards (table surface made of perforated stainless steel plate). The FFU generally has an EC motor with a simple control and monitoring facility.

Reinluftarbeitsplatz – Tischplatte Lochblech

Equipment according to your individual needs

As standard, the workstations are equipped with cleanroom-compatible LED lighting, a power socket and a potentiometer for stepless adjustment of the air speed. The basic construction consists of cleanroom profile whose closed grooves can be opened at any time. This allows for easy and thorough cleaning.

If the front side can be closed or partially closed, the workstation is provided with a stainless steel perforated plate as table surface. If the front side is open, the table surface is closed. In the basic version, 2 standard dimensions are available. These are available in a non-height-adjustable version and in an ergonomically advantageous electrically height-adjustable version. We will be happy to adapt the equipment of the clean-air workstation to your individual requirements.

Technical data

outer dimensions (WxDxH) in mm: 1200 x 800 x 1900, as well as: 1800 x 800 x 1900
frame: mk clean room profile system, natural anodized
front: open
table surface: melamine coated chipboard with d=38mm
back wall: PVC hard foam board
Side panels: single-pane safety glass or Makrolon transparent
Lighting: UNILED SL48 under-cabinet, 48W, IP50
Fan/protection class: electronically commutated/IP10
Filter: H14, filtration efficiency = 99.995% min
Vol. flow at 0.30 m/s flow velocity: 778 m³/h
Vol. flow at 0.45 m/s flow velocity: 1166 m³/h
Air flow adjustment: potentiometer
Supply voltage: 230 V AC, 50/60 Hz
Connected load: 250 W
Operating temperature: 0/+ 40°C
Housing material: untreated aluminum
Lifting height for height-adjustable version: 350mm

Weitere Leistungen im Überblick

Consulting on VDA‑19 part 2

When implementing your cleanliness requirements in accordance with VDA 19 Part 2, we support you by carrying out an actual state analysis and work with you to develop a solution for the realization of customer requirements with regard to the technical cleanliness of your components.

Consulting on VDA‑19 part 2

When implementing your cleanliness requirements in accordance with VDA 19 Part 2, we support you by carrying out an actual state analysis and work with you to develop a solution for the realization of customer requirements with regard to the technical cleanliness of your components.

Consulting on DIN ISO EN 14644‑1

We advise you on the basis of DIN ISO 14644-1 including planning, construction and initial commissioning of cleanrooms, evaluation of customer requirements, evaluation of the implementation of your project using a checklist in accordance with DIN ISO 14644-1 and VDI 2083 Sheet 5.1 as well as qualification of your cleanroom.

Cleanroom for industrial production

With the flexible room system from mkf, you can create a controlled product environment (clean room) in accordance with VDA-19 Part 2 to protect your parts and assemblies from particulate contamination. We create your individual room concept based on our wall and ceiling modules

Modular cleanroom

The flexible modular cleanroom concept from mkf makes it possible to design the cleanroom individually from the various flush-mounted wall and ceiling modules. The cleanroom can be adapted to changing requirements with minimal effort.

cleanroom equipment

With the various workstations and our cleanroom equipment, we offer you cleanroom equipment that is always individually customized to your needs.

clean air workstation

The clean air workstations from mkf support work under clean room conditions in the laboratory as well as in production, assembly and quality control. With the individual equipment, the clean air workstation can be conveniently adapted to your requirements.

OperatorDesk

The practical system worktable "Operator-Desk" supports test and inspection work and can be used in a clean room according to DIN ISO 14644. The operator desk supports test and inspection work on all mechatronic units, control cabinets, machines and systems to be set up in the clean room.

Service portfolio in the cleanroom

mkf cleans, assembels, test and packages mechanical, electrical and mechatronic components and assemblies in the 120 m² large clean room

Certificates

mkf works for customers with innovative products and high precision requirements. Therefore, our internal work processes are certified according to DIN EN ISO 9001:2015 and DIN EN ISO 14644-1 (class 6) by TÜV Rheinland Cert GmbH.

See more certificates